Recycled poly(ethylene terephthalate) and its short glass fibres composites: effects of hygrothermal aging on the thermo-mechanical behaviour

This paper reports on the effects of hygrothermal aging at 70 °C in water and at 80% relative humidity, on the thermo-mechanical properties, molar mass and microstructure of recycled poly(ethylene terephthalate) (rPET) and its short glass fibres composites.For all the investigated materials, the elastic mechanical properties (tensile and storage moduli) determined at low strain levels resulted practically unaffected by hygrothermal aging under the selected conditions. On the other hand, a marked reduction of the tensile strength and apparent fracture toughness has been observed for rPET matrix and its composites during hygrothermal aging, more markedly for materials immersed in water than for those aged at 80% RH. Both properties resulted to be related on the molar mass of the rPET matrix, that decreased during hygrothermal aging as a consequence of the hydrolysis process.The materials glass transition, evaluated as the temperature of the loss factor peak, increased during hygrothermal aging due to the progressively restricted mobility of the amorphous phase caused by a concurrent crystallinity increase. This crystallization process (chemicrystallization) is favoured by temperature, by the plasticizing effect of water and by the reduction of molar mass.Consistently with the mechanical measurements, the morphology of fracture surfaces exposed to hygrothermal aging in water revealed a reduction of plastic deformation of the rPET matrix and a weakening of the fibre-matrix interface for rPET composites.     

不同原料生产的CPE对PVC改性的影响

选取三种不同PE原料,采用相同的氯化工艺及配方生产CPE,通过对经CPE改性后的PVC流变性能测试和型材加工应用实验,研究了不同原料生产的CPE对PVC改性的影响。     

Crosslinking of cotton cellulose in the presence of alkyl diallyl ammonium salts. I. Physical properties and agent distribution

We used three kinds of alkyl diallyl ammonium salts (methyl, ethyl, and propyl) in combination with dimethyloldihydroxyethyleneurea (DMDHEU) as crosslinking agents. The nitrogen content, dry crease recovery angle (DCRA), moisture regain, and wicking height for the DMDHEU/alkyl diallyl ammonium salts were in the order of ? CH₃ > ? C₂H₅ > ? C₃H₇, but the wet crease recovery angle (WCRA) and tensile strength retention (TSR) were in the opposite order at the same resin concentration. For the same DCRA and TSR, the WCRA values for only DMDHEU were lower than those for DMDHEU/alkyl diallyl ammonium salts, and the WCRA values for DMDHEU/alkyl diallyl ammonium salts were in the order of ? C₃H₇ > ? C₂H₅ > ? CH₃. Both the ? OH group of the cellulose and DMDHEU could react with the vinyl or epoxy groups of the alkyl diallyl ammonium salts during the pad–dry–cure process. The surface migration for DMDHEU/alkyl diallyl ammonium salts was in the order of ? CH₃ > ? C₂H₅ > ? C₃H₇. Fabrics treated with DMDHEU/alkyl diallyl ammonium salts showed good antibacterial properties. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1662–1669, 2003     

化肥渣油性质变化分析

对2006年全年化肥渣油数据进行汇总,找出了渣油性质大幅度变化的主要原因,对其中关键数据进行分析评价,并提出改进与预防措施,为化肥装置的平稳操作提供了参考.     

Phase characterization and mechanical and flame‐retarding properties of nano‐CaSO4/polypropylene and nano‐Ca3(PO4)2/polypropylene composites

An in situ deposition approach was used for the synthesis of nano‐CaSO₄ and nano‐Ca₃(PO₄)₂. The nanosize particles were confirmed with an X‐ray diffraction technique. Composites of polypropylene (PP) with 0.1–0.5 wt % nano‐ or commercial CaSO₄ or nano‐Ca₃(PO₄)₂ were prepared. The transition from the α phase to the β phase was observed for 0.1–0.3 wt % nano‐CaSO₄/PP and nano‐Ca₃(PO₄)₂/PP composites. This was confirmed by Fourier transform infrared. A differential scanning calorimetry analysis was carried out to determine the thermal behavior of the nanocomposites with increasing amounts of the nano‐CaSO₄ and nano‐Ca₃(PO₄)₂ fillers. Increases in the tensile strength and Young's modulus were observed up to certain loading and were followed by a decrease in the tensile strength. A continuous decrease in the elongation at break (%) was also observed for commercial CaSO₄ and larger nano‐Ca₃(PO₄)₂. A decrease in the mechanical properties after a certain loading might have been due to the agglomeration and phase transition of PP in the composites. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 670–680, 2007     

平行梁式电容传感器力学性能的仿真与分析

针对S型平行梁式电容称重传感器参数结构设计问题,运用有限元软件ANSYS Workbench对平行梁式弹性体结构进行参数化模拟仿真,基于二次多项式曲面拟合建立其结构力学性能与主要结构参数的函数关系,并通过算例分析验证了拟合公式的有效性。研究表明,拟合公式对复杂仿真计算后的结果有很好的近似,能更好的反应实际情况,公式结构更加简洁,具有较快的收敛速度、较高的精度和较好的推广能力,有利于准确实现平行梁式电容称重传感器结构参数设计。     

稀土顺丁橡胶／SBR体系的力学性能

稀土顺丁橡胶与丁苯橡胶（ＳＢＲ）共混，可以改善ＳＢＲ的耐低温性能。当稀土顺丁橡胶／ＳＢＲ（质量比）这２０／８０时，－３０℃的ｔａｎδ仅小于ＳＢＲ，６０℃的ｔａｎδ最小。其共混胶的应力－应变性能、湿滑指数、磨耗及生热性能均优于镍系顺丁橡胶／ＳＢＲ共混体系。     

ABS/镁盐晶须复合材料的研究

以（乙烯／乙酸乙烯酯／苯乙烯）三元共聚物（BS树脂）为增容荆，采用双螺杆挤出机制备了（丙烯腈／丁二烯／苯乙烯）共聚物（ABs）／镁盐晶须复合材料，研究了BS树脂、镁盐晶须用量对复合材料力学性能、流动性能的影响、结果表明，加入BS树脂有利于提高复合材料的拉伸强度和冲击强度，复合材料的熔体流动速率（MFR）随BS树脂用量增加而增大，且其MFR对温度或负荷呈非线性函数关系，比ABS对负荷更为敏感．     

SBS and SEBS block copolymers as impact modifiers for polypropylene compounds

Blends of polypropylene (PP) and thermoplastic elastomers (TPE), namely SBS (styrene‐butadiene‐styrene) and SEBS (styrene‐ethylene/1‐butene‐styrene) block copolymers, were prepared to evaluate the effectiveness of the TPE type as an impact modifier for PP and influence of the concentration of elastomer on the polymer properties. Polypropylene homopolymer (PP‐H) and ethylene–propylene random copolymer (PP‐R) were evaluated as the PP matrix. Results showed that TPEs had a nucleating effect that caused the PP crystallization temperature to increase, with SBS being more effective than SEBS. Microstructure characterization tests showed that in most cases PP/SEBS blends showed the smallest rubber droplets regardless of the matrix used. It was seen that SEBS is a more effective toughening agent for PP than SBS. At 0°C the Izod impact strength of the PP‐H/SEBS 30% b/w blend was twofold higher than the SBS strength, with the PP‐R/SEBS 30% b/w blend showing no break. A similar behavior on tensile properties and flexural modulus were observed in both PP/TPE blends. Yield stress and tensile strength decreased and elongation at break increased by expanding the dispersed elastomeric phase in the PP matrix. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 95: 254–263, 2005     

煤的荧光特性与其工艺性能的关系研究

简述了煤中镜质组荧光产生的机理及荧光参数的测量方法,通过测定一系列煤的粘结性和10kg小焦炉结焦性试验,探讨了煤的荧光特性与其工艺性能的关系。煤的荧光参数与其反射率呈正的线性相关关系,与其挥发分含量呈负的线性相关关系;煤的粘结性、结焦性均与其荧光参数有关;当煤化程度相同、煤岩组成基本相同时,煤的荧光强度愈强,其结焦性能愈好。